|
|
|
|
 |
 |
|
Sealants & Cement Additives
| Miriseal (MS-A101) |
| MiriSeal is a ready to use impregnation Sealer which is applied to new and existing brick, stone, masonry, block, concrete and plastered. Miriseal acts as a water repellant by penetrating the surface and creating a waterproof barrier. Spray on application provides an excellent barrier against the absorption of water, salts and carbon contamination, penetrating up to 10mm it enhances the thermal properties of the material being sealed and does not change treated surfaces appearance.
MiriSeal is quartz based providing long term durability. At the Coast, due to the high humidity, fungi is a major problem. The maji-ya-chumvi or coral surface quickly turns green and slippery with the growth. Application with the MiriSeal MS101 sealant prevents the surface from retaining moisture and therefore fungal growth is prevented.On existing maji-ya-chumvi finishes, a simple cleaning with a mild acid or detergent (like JIK) and subsequent application of the sealant provides a 5-10 years stain free surface. On floors that need a glossy finish, it is strongly recommended that MiriSeal MS-A101 is applied prior to wax application, as this will prevent the wax from disappearing into the surface and will reduce the amount of wax needed to achieve gloss finish.
PRODUCT INFORMATION
Colour: clear, transparent liquid
Type: water based chemical substrate
PH Value 8,2
Specific weight 1 kg/lt
Spreading Rate 4 -6 m2 /lt depending of the surface porosity
SPECIFICATIONS
Density Approx 1 g/cm3 at 20 degrees C
PH Approx 12 at 10 g/lt
Viscosity Approx 1 mm2/s at 20 degrees C
PACKAGING 5lt, 20lt
|
| MiriGuard (MG-B101) |
Highly efficient plaster Waterproofer and damp proofer, ready mixed and ready to use liquid. Miriguard penetrates 5 to 8 mm on plaster work and 2 to 3 mm on previously painted surfaces. Creates a waterproof single skin walling system. When sprayed provides an excellent barrier against water absorption.
FEATURES
Water based, UV resistant, compatible with all type of cement based surfaces, Excellent Sealer
PRODUCT INFORMATION
Colour Clear, transparent liquid
Type Water based chemical substrate
PH Value 8,2
Specific weight 1.05Kg / Lt
Spreading Rate 4 m2 per Liter of solution. Depend of the surface Porosity
SPECIFICATIONS
Form Liquid
Density Approx 1,25 g/cm3 at 20 degrees
PH Approx 12 at 10 g/litre
Viscosity Approx 1,1mm2/s at 20 degrees
PACKAGING 5lt, 20lt
|
| SuperSeal |
A Miriseal based formulation especially designed porous coral stone.
FEATURES
Water based, UV resistant, excellent sealer
PRODUCT INFORMATION
Colour Clear, transparent liquid
Type Water based chemical substrate
Spreading Rate 3 m2 per Liter of solution. Depend of the surface Porosity
|
| Slurryseal |
High efficiency construction waterproofer. Intended uses for Slurryseal include flat roofs, balconies with falls, retaining walls, lining and tanking,
Shower cubicles and as an additive into the plaster mix to repair cracks.
Slurryseal is water-based and UV resistant and compatible with all types of cement based surfaces. It has very strong bonding component and roof tiles can be laid direct on Slurryseal
PRODUCT INFORMATION
Color Milky white liquid
Type Water-based chemical
PH Value 8,7
Specific weight 1 kg/lt
Spreading Rate 1 - 2 m2 /lt Slurryseal
DURABILITY
Unlimited life when protected externally with plaster mortar or other finishes
5 to 7 years when exposed directly to weather conditions
PACKAGING 1lt, 5lt, 10lt, 20lt
|
| Miribond |
|
A fast-acting cement additive designed to increase the strength of mortar (sand and cement mix) used to bond stone tiles, quarry tiles and ceramic tiles to screeds. It is also ideal for use in plaster of arches, corners, sills. Miribond can also be used for strengthening grouting of tiles.
|
|
|
|
|
|
|
|
 |
|
|
